Faber 85 CF Steel 2640 PSI Cylinder L or R Mod Valve - H Valve

Faber 85 cf Steel / Galvanized Epoxy Over-Coat Painted- 2640 PSI with H Valve Left Or Right side

• The LP85 cu. ft. at 2640 PSI - This lower pressure like the 1950's - 1970's helps avoid stress on vintage regulator yokes
• Thermo Modular Valve with option for Right ( left H valve ) or Left ( Right H valve )
• Includes Vinyl Self Drain Boot
• 7.01 inch diameter & 25.98 height is ALMOST identical to the steel 72 benchmark of vintage dive cylinder ( 6.9 x 26.0 )
  • Looks and Feels like the original
  • Fits MOST vintage back packs for steel 72
• Durable unpainted hot-dipped galvanized finish - Epoxy Over-Coat Painted
• Phosphatized corrosion resistant internal surface

* accessories shown DIN Regulator, Double Hose Regulator are ONLY EXAMPLES!

This sale is for a Modular Pro Valve with an H outlet - 200 BAR DIN

Fits Most Standard SCUBA Aluminum and Steel Cylinders 3/4 NPSM

Note the orientation is from the divers back

Choose

• Right Hand Valve Hand-wheel ( Left Side H - Valve )
  • A standard scuba cylinder has a Right Hand valve, that sits above the divers Right Shoulder
  • The H is now on the opposite side of the hand-wheel, or behind the divers Left Shoulder
• Left Hand Valve Hand-wheel ( Right Side H-Valve )
  • Non Standard - Non Traditional - Valve Hand-wheel is above the divers Left Shoulder
  • The H is now opposite side of the hand-wheel, or behind the divers Right Shoulder

Ideal for the Vintage Diver who wants to use a Double Hose Regulator on the Center Outlet, and add an accessory low profile DIN regulator for Alt Air, or BCD, Etc.

Note The modern Pro Valve is "thicker" profile, so you must be using a Long Yoke, or Modern Heavy Yoke upgrade on double hose regulators.

Flat $45 Rate Shipping to Continental U.S. only lower 48 - ONLY