VOIT Faber 50 CF Steel Twin Set 2640 PSI

Faber 50 cf Steel - 2640 PSI twin set with VOIT Single Outlet Manifold $2322 value!

• 50 cubic feet, 2640 PSI service pressure, 5.5-inch diameter, Hot-zinc spray coating protected with epoxy paint (Grey color), Phosphatized corrosion resistant internal surface $469 ea. = total $938
• VOIT Single Outlet Manifold ( Completely Rebuilt - new o-rings, new burst disc ) $99 - very hard to find!
• VOIT Decals ( 2 ) *$10 ea.
• Blue Steel HD SS Bands and Hardware $129
• Aluminum Travel Plate w/ Padded Back Pad $189
• VOIT Reproduction Web Harness "VOIT Blue" $79
• 20 lb or 30 lb wing $299
• FX50 VOIT 50 Fathom reproduction ready to dive $569
• Twin Cylinder / Manifold / Bands Fully Assembled $150 value!!!

Your Choice of

• Cylinder Only Set - Faber Twin Cylinders / VOIT Decals (2) / VOIT Single Outlet Manifold / SS Bands w/hardware
• Cylinder & Wing/Harness Set - Faber Twin Cylinders / VOIT Decals (2) / VOIT Single Outlet Manifold / SS Bands w/hardware / VOIT Reproduction Harness in VOIT Blue webbing / Aluminum Travel Plate / Padded Back Pad / 20 or 30 lb Wing . Add $528 value
• Complete Set Cylinders/Harness/Wing/VOIT Double Hose Regulator - Faber Twin Cylinders / VOIT Decals (2) / VOIT Single Outlet Manifold / SS Bands w/hardware / VOIT 50 Fathom - Reproduction Double Hose Regulator / Reproduction Harness in VOIT Blue / Aluminum Travel Plate / Padded Back Pad / 20 or 37 lb Wing
  • Your Choice of a 20 lb or 37 lb travel wing
  • Completely Ready to Dive VOIT 50 Fathom ( FX50 new body, completely rebuilt interior: parts kit, seat, gaskets, diaphragms, silicone hoses, silicone one way valves, silicone "whore-glass" mouthpiece ) HD Yoke * based on Mistral internal components

*While Supply lasts when you order a package with backplate / wing you can ADD FREE HL808 Back Pad - just mention at time of sale in comments

$100 Flat Rate - Shipping to Continental U.S. only lower 48 - ONLY

*Note the wing choice is extremely MINIMAL Lift for divers who a properly weighted in a full 5-7 mm Wetsuit or Drysuit

Faber L50 is -2.43 lb Full ( each cylinder ) and 1.24 lb Empty . Now to double is Negative 4.86 add manifold/bands - you must have adequate thermal protection for buoyancy and weight yourself properly as this system is minimal.

Due to weight restrictions our doubles packages ship as individual components ready-to-assemble: two cartons containing the cylinders with modular valves (including port plugs) installed in the cylinders hand tight along with a third carton containing the manifold crossbar, bands and bolt kit, VIP stickers. You will need to assemble the package yourself prior to filling or if you prefer arrange for a local dive shop to assemble them for a fee. Assembling a set of doubles yourself comes with printed assembly instructions.